E-type Series 1 & 2 FHC Standard Trim Kit Checklist
Deep pile 100% Wilton Wool Carpet precut with bound edges (includes leather heel pad (early) or storvic heel pad (late).
English Natural Jute Underfelt, Jaguar factory specification bitumen-topped jute (in thicknesses of 1/2″ and 3/4″, as necessary. (Natural jute underfelts reduces heat and road noise).
Carpet Stud Set
8 male and 8 female, plastic type, as original.
Leather Seat Covers
Leather hides carefully hand selected to match in grain and color, supplied complete, no sewing necessary (some coupes left the factory with roadster seats, these seats have back that are not quite as wide as fixed head seats – please enquire/specify).
Center Console Kit
All necessary precut vinyl, foam & piping to retrim console and radio surround, (includes leather console cushion cover & gaiter).
Trimmed with bound edges, ready to install (with or without bonnet latch holes, please specify).
Trimmed with bound edges, ready to install (with square or curved trailing edge, please specify).
Trimmed with bound edges, ready to install.
Storage Box Mat
Hardura with bound edges, ready to install.
Inner Sill Panel Kit
Vinyl & closed cell foam covering, pre-cut, ready to fit.
Wheel Arch Covers
Pre cut covering in moquette, ready to install.
Rear Bulkhead Hardura
Trimmed, with bound edges, ready to install.
Lower Rear Bulkhead
Pre cut in moquette, ready to install.
Side Casing Panels (front & rear)
4 complete panels, vinyl covered, panel fixing clips included.
Door Closing Panels
Complete aluminum vinyl covered rebate panels, trimmed and ready to install.
Storage Box Retrim Kit
Precut vinyl, ready to install.
Complete, ready to install, includes vinyl and foam covers for door cappings and fixing clips, (includes installed mounting hardware for chrome trim).
Rear Parcel Area Retrim Kit
Early cars have two piece hardura mat, supplied bound ready to install. Later cars have one piece hardura mat, supplied bound, ready to install.
Lower Rear Door Panel
Complete vinyl covered panel, includes fixing clips.
Upper Rear Door Panel
Replacement panel in moulded ABS plastic trimmed in vinyl. (This replaces the factory original made in moulded paperboard that is always damaged or missing).
Panel Below Rear Door
Complete aluminum panel fits below rear door panel, vinyl covered, ready to install.
In fawn, grey or green original English woolcloth bonded to closed cell LATEX FOAM backing, unbacked material is also supplied to retrim roll at cantrail and sunvisors.
Wiring Loom Cover Panel
Aluminum panel trimmed in vinyl as original, this often damaged or missing panel protects the main harness loom under the dash.
Underdash Cover Panel
Black grained board panel often missing or damaged on all E Types (early 3.8 cars had aluminum underdash panel, black vinyl provided to recover).
Cantrail Panel Retrim Kit
Pre cut vinyl and foam to recover cantrails.
Fixing Screw Kit
Stainless steel-finished screws made in England (hard to find in the USA) these will make fixing your new trim a cinch!
Major Trim Kit Content Checklist
Please note, our Major Trim Kit includes ALL the contents of our Standard Kit PLUS:
Seat Cushion Foams
Moulded to the exact contour of original. Made of a high-density, closed-cell foam that will not deteriorate regardless of climate. (Not to be confused with those manufactured from composite polyfoam).
Made in England by the original suppliers to Jaguar. Complete with brass fixing plates and fixing hooks. (Beware of poor quality Asian reproductions).
Complete replacement door capping panels, pressed steel base, trimmed in vinyl over closed cell foam.
Moulded PVC plastic, foam-filled (grain matches original factory specification, easy-to-follow fitting instructions are included).
We urge you to carefully compare the quality and originality of our sample materials with others. (Note: Connolly leather, felt-backed carpet, moulded foam cushions, closed cell sill foam, natural jute underfelt, and most importantly our Factory original style latex foam backed wool headlining material (ask for samples from others, compare and see for yourself).
Carefully compare the content of our Interior Trim Kit with others, whether a full panel or just covering material is supplied. Check for extras, such as headrest foams (installed). panel clips, cantrail panel retrim kit, upper rear door panel, underdash cover panels and panel fixing screws and washers.
We also offer full trim installation services (send us your seats for retrimming at fixed prices and guaranteed results, or we offer free technical/installation advice to you or your shop. Remember: don’t just shop price, look at value for your money, keeping in mind all BAS Ltd. kits and products come with a no-nonsense guarantee on fit and originality to concours standards. If you’re not completely satisfied return it for a full refund.
You get what you pay for with most things in life and Jaguar interiors are no exception. “Do it once, do it Right”. Compare samples, compare content of kits, ask the right questions. Don’t blow your careful restoration or devalue your car with a poor quality non original interior. The choice is yours.
BAS Quality Check List:
✓ Quality Materials
✓ Quality Workmanship
✓ Quality Service